XINLAND LASER CO.,LTD
XINLAND LASER CO.,LTD SERIOUS SUPPLIER , PROFESSIONAL SERVICE
Add to Cart
Adjustable Driver Circuit TTL Trigger 650nm Red Dot Laser Module
Technical Parameter
| Serial Number | Article | Technical Data |
| 1 | Laser Wavelength | 650nm±5nm |
| 2 | Output Power | ＞100mW |
| 3 | Laser Grade | Class 4 |
| 4 | TTL Output | ＞1K HZ Working output power =continuous power x 40% |
| 5 | Output stability | ±5% |
| 6 | Beam Mode | Round dot |
| 7 | Beam size @3M | Φ3mm |
| 8 | Beam Divergent | <2mrad |
| 9 | Diver board input voltage | DC 12V |
| 10 | LD input voltage | red-3.3V |
| 11 | LD input current | red-180mA |
| 12 | Modulation Mode | TTL |
| 13 | TTL trigger mode | High Level Effective(>DC 2.0V) |
| 14 | Operating rate | <30KHz |
| 15 | Analog controlled input voltage | DC 0--12V |
| 16 | Analog controlled max input voltage | DC12V |
| 17 | Operating temperature | 15℃--50℃ |
| 18 | Starting time | <1 minutes |
| 19 | Life time | >10000hours |
| 20 | Product weight | 11g |
Product Details:
High-quality laser diode module,
Optical glass lens,
Driver circuit and housing
Better line quality, better angle
High reliability, high stability, long life, low price
Applications:
Machine vision
Industrial inspection
Industrial marking devices
3D contour mapping
Positioning & visualization
High-end alignment
Laser targeting devices
Laser locate on sewing machine, clothes process, shears, clippers machine
Tyre laser locate, saw machine, power machine
Printer laser straight
Laser welding, golf process
SMT PCB laser marking and so on...
Precautions:
★ 1.The laser has a potential harm to the human body and the eyes,It is forbidden to use laser to irradiate others,,especially in the eyes.
★ 2. The power supply itself has no key switch,and the power panel and the input line are exposed,When the laser connects or removes the circuit, it must operate under the condition of power off, in order to prevent the electric shock.
★ 3 It is necessary to ensure that the temperature of the shell of the laser head is close to that of the suitable operating temperature before the laser can be turned on, so as to avoid the excessive temperature difference, which may affect the performance of the laser or damage the device.
★ 4. The product shall be used in dry , clean and non - static environment with working temperature of 15 - 50 ℃ to avoid high temperature , high humidity and violent vibration and impact .
★5. Do not arbitrarily adjust the potentiometer on the power supply board to avoid excessive current, circuit board or laser burn.
★6. Please do a good job of external heat dissipation measures, as far as possible to maintain the shell heat cooling air path and module cooling air path consistent, lest the temperature is too high, affect or damage the laser.
★7. This product power supply for dC-12V do not connect to other power sources, lest damage the laser.